Sharp R-642BKW - Manual (Page 165)

GB-3
ENGLISH
OVEN AND ACCESSORIES
NOTES:
• The waveguide cover is fragile. Care should be taken when cleaning inside the oven to ensure that it is not
damaged.
• After cooking fatty foods without a cover, always clean the cavity and especially the grill heating element
thoroughly, these must be dry and free from grease. Built-up grease may overheat and begin to smoke or
catch fire.
• Always operate the oven with the turntable and turntable support fitted correctly. This promotes thorough,
even cooking. A badly fitted turntable may rattle, may not rotate properly and could cause damage to the
oven.
• All food and containers of food are always placed on the turntable for cooking.
• The turntable rotates clockwise or anti-clockwise. The rotary direction may change each time you start the
oven. This does not affect cooking performance.
WARNING: This symbol means that the surfaces are liable to get hot during use. The door, outer
cabinet, oven cavity, accessories and dishes will become very hot during operation. To prevent burns,
always use thick oven gloves.
OVEN
1. Door
2. Door
hinges
3. Oven lamp
4. Waveguide cover (DO NOT REMOVE)
5. Control panel
6. Coupling
7. Door
latches
8. Oven cavity
9. Door seals and sealing surfaces
10. Door safety latches
11. Ventilation
openings
12. Outer cabinet
13. Power supply cord
14. Door
handle
ACCESSORIES:
Check to make sure the following accessories are
provided:
(15) Turntable (16) Turntable support (17) Coupling
(18) Rack
• Place the turntable support in the centre of the
oven floor so that it can freely rotate around the
coupling. Then place the turntable on to the turn-
table support so that it locates firmly into the cou-
pling.
• To avoid turntable damage, ensure dishes and con-
tainers are lifted clear of the turntable rim when
removing them from the oven.
For use of the rack, refer to the grilling sections on
page GB-10.
Never touch the grill when it is hot.
NOTE: When you order accessories, please mention
two items: part name and model name to your deal-
er or SHARP authorised service agent.
11
12
13
1 2 3
5
10 9 8 14 6 4 7
Hub (inside)
15. Turntable
(glass)
17. Coupling 16. Turntable
support
18. Rack