Burley 950038 User Manual

Important, Hitch flex connector replacement instructions for

Advertising
background image

Note:

Your new Burley flex connector

should exactly match your old Burley

connector.

• Square tow bar = 4 ridges

• Round tow bar = smooth

These pieces are NOT

interchangeable.

950037 Contents:

(1) Hitch connector for round tow bar
(1) Lock nut
(1) Safety strap assembly
(1) Bolt
(2) D-ring/clip

950038 Contents:

(1) Hitch connector for square tow bar
(1) Lock nut
(1) Safety strap assembly
(1) Bolt
(2) D-ring/clip

For use with Burley
standard and forged
metal hitches

1. Remove trailer from bicycle.
2. Remove existing bolt, safety strap, lock

nut and D-ring/clip from flex connector

which is located at the end of tow

bar.

Figure 1

3. Remove old flex connector from end

of tow bar and insert new connector,

aligning hole in connector with holes

in tow bar.

Hitch Flex Connector

Replacement Instructions For:

Round Tow Bar Kit 950037
Square Tow Bar Kit 950038

Note:

Your new Burley flex connector

should exactly match your old Burley

connector.

• Square tow bar = 4 ridges

• Round tow bar = smooth

These pieces are NOT

interchangeable.

950037 Contents:

(1) Hitch connector for round tow bar
(1) Lock nut
(1) Safety strap assembly
(1) Bolt
(2) D-ring/clip

950038 Contents:

(1) Hitch connector for square tow bar
(1) Lock nut
(1) Safety strap assembly
(1) Bolt
(2) D-ring/clip

For use with Burley
standard and forged
metal hitches

1. Remove trailer from bicycle.
2. Remove existing bolt, safety strap, lock

nut and D-ring/clip from flex connector

which is located at the end of tow

bar.

Figure 1

3. Remove old flex connector from end

of tow bar and insert new connector,

aligning hole in connector with holes

in tow bar.

Hitch Flex Connector

Replacement Instructions For:

Round Tow Bar Kit 950037
Square Tow Bar Kit 950038

Figure 1:

Forged Hitch Shown

Tow Bar

Hook fastened to

D-ring/clip

under tow bar

Flex Connector

D-ring/Clip

Bolt

Quick release Lever

retaining Pin

Safety strap

wrapped twice

around chainstay

Figure 1:

Forged Hitch Shown

Tow Bar

Hook fastened to

D-ring/clip

under tow bar

Flex Connector

D-ring/Clip

Bolt

Quick release Lever

retaining Pin

Safety strap

wrapped twice

around chainstay

THiS PArT iS DeSigNeD FOr uSe ON BurLeY

TrAiLerS ONLY. uSe ON ANY OTHer TrAiLer

CAN reSuLT iN SeriOuS iNJurY.

iMPOrTANT

THiS PArT iS DeSigNeD FOr uSe ON BurLeY

TrAiLerS ONLY. uSe ON ANY OTHer TrAiLer

CAN reSuLT iN SeriOuS iNJurY.

iMPOrTANT

Advertising
This manual is related to the following products: