Sharp LL-S201A User Manual

Page 7

Advertising
background image

2. CONNECTION and LIMITATION

2.1. CONNECTION










1. Connect the PC by USB cable and the image cable (Display port / HDMI).

2. Turn on a monitor.

3. Launch the service tool.

2.2. LIMITATION

To upgrade the scalar firmware, it is necessary to set the PC graphics board to its default

color settings.

2.3. USAGE

AT

MULTI

DISPLAY

When using this tool with a notebook PC, it is necessary to set a resolution setting for

LL-S201A to 1920x1080. Therefore, if the setting of the multi-screen is “Duplicate Display”,

please change the display setting to “Extended Display” with resolution as 1920x1080, and

set LL-S201A as primary display.

Moreover, the service tool should be operated at the LL-S201A side.

USB

Display Port (DP)
/ HDMI

AC adopter

Advertising