Neff KI2423D40 - Manual (Page 28)

en
28
Controls
Fig. "
Switching on
the appliance
Fig. "
Switch on the appliance with the
On/Off button 1.
The appliance begins to cool.
Light is switched on when the door
is open.
We recommend a factory setting
of +4 °C in the refrigerator compartment.
Do not store perishable food warmer
than +4 °C.
Operating tips
■
After the appliance has been switched
on, it may take several hours until the
set temperature has been reached.
Do not put any food in the appliance
beforehand.
■
While the refrigeration unit is running,
water droplets or hoarfrost may form
at the rear panel of the refrigerator.
This is due to functional reasons.
It is not necessary to scrape off the
frost or wipe off the water droplets.
The rear panel defrosts automatically.
The condensation collects in the
drainage channel and is carried to the
refrigeration unit where it evaporates.
Fig. #
■
The front sides of the housing are
partly heated slightly. This prevents
condensation in the area of the door
seal.
Setting
the temperature
Fig. "
Refrigerator compartment
The temperature can be set
from +2 °C to +8 °C.
Keep pressing temperature setting
button 3 until the required refrigerator
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on temperature
display 4.
Freezer compartment
The temperature in the freezer compart-
ment depends on the temperature in the
refrigerator compartment.
1 On/Off button
Serves to switch the whole
appliance on and off.
2 “super” button
Switches Super function on and
off (see chapter “Super function”).
It is lit when the Super function is
switched on.
3 Temperature selection button
Press this button to set the
temperature.
4 Temperature display
The numbers correspond
to the set refrigerator
compartment temperatures in °C.
5 Alarm button
Used to switch off the
warning signal, see chapter
“Alarm function”.