End of operation, Preset operation, Setting the clock – Neff U14M42N3GB User Manual
Page 10: Set the clock using the rotary selector, Checking, correcting or deleting settings, Baking, Note
10
Once the cooking time has elapsed, the bottom oven switches
off automatically.
1.
Turn the operating mode and temperature selector back to
the
Û
zero position.
2.
Press the
KJ
clock function button to exit the clock function.
End of operation
Automatic switch-off at a set time.
1.
Set the operating mode and temperature for the bottom oven.
The bottom oven starts heating.
2.
Press the
KJ
clock function button repeatedly until the
KJ
and
y
symbols light up.
3.
Set the end of operation using the rotary selector
(e.g.
‚ƒ
:
„‹
o'clock).
The setting is applied automatically. The clock is then
displayed again.
The bottom oven switches off automatically at the time set for
the end of operation.
1.
Turn the operating mode and temperature selector back to
the
Û
zero position.
2.
Press the
KJ
clock function button to exit the clock function.
Preset operation
The bottom oven switches on automatically and switches off at
the time preselected for the end of operation. To set this
function, combine the cooking time and end of operation clock
functions.
Bear in mind that food which spoils easily should not be left in
the cooking compartment for too long.
1.
Set the operating mode and temperature for the bottom oven.
The bottom oven starts heating.
2.
Press the
KJ
clock function button repeatedly until the
KJ
and
x
symbols light up.
3.
Set the cooking time with the rotary selector
(e.g.
‚
:
„‹
hours).
The setting is applied automatically.
4.
Press the
KJ
clock function button repeatedly until the
KJ
and
y
symbols light up.
5.
Set the end of operation using the rotary selector
(e.g.
‚ƒ
:
„‹
).
The bottom oven switches off and waits until the correct time
to switch on (in the example at
‚
:
‹‹
).
The bottom oven switches off automatically at the time set for
the end of operation
‚ƒ
:
„‹
1.
Turn the operating mode and temperature selector back to
the
Û
zero position.
2.
Press the
KJ
clock function button to end the preselection
mode.
Setting the clock
You can only change the clock when no other clock function is
active.
1.
Press the
KJ
clock function button repeatedly until
the
KJ
and
3
symbols light up.
2.
Set the clock using the rotary selector.
The setting is applied automatically.
Checking, correcting or deleting settings
1.
To check your settings, press the
KJ
clock function button
repeatedly until the corresponding symbol lights up.
2.
If necessary, you can correct your setting using the rotary
selector.
3.
If you wish to cancel your setting, turn the rotary selector anti-
clockwise to the original value.
Baking
In this section, you will find information on
■
Baking on one level
■
Baking on two or more levels
■
The baking table
■
The baking table for ready-made products
■
Tips and tricks for baking
Note: Do not use shelf height 2 when baking with
3
CircoTherm®. The air circulation is impaired and this will have
a negative effect on your baking.
We recommend that you use dark-coloured metal baking tins.
Tinplate and glass dishes increase the baking time required
and the cake will not brown evenly.
If you wish to bake using tinplate tins and
%
Top/bottom heat,
you should use shelf position 1.
Always slide the universal pan in carefully as far as it will go
and make sure that the sloping edge is facing the appliance
door.