Neff U14M42N3GB - Manual (Page 8)

8
Optional accessories
You can purchase optional accessories from the after-sales
service or specialist retailers. You will find a comprehensive
range of products for your appliance in our brochures and on
our website.
Before using the appliance for the first time
In this section, you can read about
■
How to set the clock after connecting up your appliance
■
How to clean your appliance before using it for the first time
Setting the clock
Note: When you press the KJ clock function button, you have
3 seconds to set the clock using the rotary selector. Should this
have been insufficient for you, you can amend the clock time
later.
‹ : ‹‹ flashes in the clock display.
1. Briefly press the KJ clock function button to go to the
setting mode.
The
KJ and 3 symbols light up. ‚ƒ : ‹‹ appears in the
clock display.
2. Set the current time using the rotary selector.
Your setting is accepted after 3 seconds.
Changing the clock
To subsequently change the time, press the KJ clock function
button repeatedly until the KJ and 3 symbols light up again.
Change the time with the rotary selector.
Cleaning the appliance
Clean your appliance before using it for the first time.
1. Remove any accessories and residual packaging from both
cooking compartments.
2. Clean the accessories and cooking compartments with hot
soapy water (see section: Cleaning and care).
3. Heat the at 270 °C using Full-surface grill and the bottom
oven at 240 °C using CircoTherm for 30 minutes.
4. Once the cooking compartments have cooled, wipe them out
with hot soapy water.
5. Clean the outside of the appliance with a soft, damp cloth
and soapy water.
Operating the appliance
In this section, you can read about
■
how to switch your appliance on and off
■
how to select an operating mode and temperature
Switching on the appliance
1. Turn the operating mode selector for the õ bottom oven or
for the ô top oven clockwise until the desired operating
mode is selected.
2. Turn the corresponding temperature selector clockwise, until
the desired temperature is selected.
The corresponding
r indicator lamp lights up while the oven
is heating up and during any subsequent heating.
Switching off the appliance
1. Turn the operating mode selector back to the Û position.
2. Turn the temperature selector back to the Ú position.
After the appliance is switched off, the cooling fan may
continue to run.
Optional accessories Order no.
System steamer N8642X3
Grill set Z1240X2
Glass pan Z1262X0
Extra-deep pan, enamelled Z1272X0
Baking tray, aluminium Z1332X0
Baking tray, enamelled Z1342X0
Baking tray, non-stick Z1343X0
Roasting tray, enamelled, two-piece Z1512X0
Retrofit kit, CLOU® 1x Z1701X2
CLOU® 3x telescopic shelf Z1742X2
CLOU® 4x telescopic shelf with full exten-
sion
Z1755X2
Optional accessories Order no.