Neff C54L60N3GB - Manual (Page 7)

7
2. Press the button for the microwave power setting you require.
The selected power setting lights up and a suggested
cooking time is displayed.
3. Set the cooking time using the rotary selector.
4. Press the
… button.
Operation begins. The cooking time starts counting down in the
display.
The cooking time has elapsed.
A signal sounds. The microwave operation has finished. You
can stop the audible signal by pressing the ÁÀ button. Switch
off with the main switch or make new settings.
Changing the cooking time
Change the cooking time using the rotary selector.
Changing the microwave power setting
Press the button for the new microwave power setting. Use the
rotary selector to set the cooking time and restart.
Cancelling operation
Press and hold the
… button for a few seconds and switch off
the main switch.
Note: If you open the appliance door during cooking, the fan
may continue running.
1, 2, 3 series of operations
You can use the series of operations function to set up to three
different consecutive settings and then start.
In this section, you can find out how to set a series of
operations.
Ovenware
Always use microwave-safe, heat-resistant ovenware.
Setting a series of operations
Prerequisite: switch on the main switch. Your appliance is ready
for operation and the ~ symbol lights up
1. Press the °±² button.
The ° for the first operation in the series lights up.
2. Set the first microwave power setting and cooking time.
3. Press the
°±² button again.
The ± for the second operation in the series lights up.
4. Set the second microwave power setting and cooking time.
5. Press the
°±² button again.
The ² lights up for the third operation in the series.
6. Set the third microwave power setting and cooking time.
7. Press the
… button.
Operation begins. In the clock display, the total cooking time is
displayed and the currently activated operation is lit.
The cooking time has elapsed
A signal sounds. The series of operations has finished. To stop
the signal, press the ON clock function button. Switch off the
appliance or make new settings.
Opening the appliance door during operation
Operation is suspended. The cooling fan may continue to run.
After closing the door, press the … button. Operation
continues.
Changing the setting
Changes can only be made before operation begins. Press
the °±² button to go to the desired setting, and make the
changes.
Cancelling operation
Press the illuminated button for the set microwave power
setting. Make new settings or switch off the appliance.
Pausing operation
Press the
… button briefly. Operation is suspended. Press
the … button again, operation continues.
Memory
The memory gives you the option of saving your own settings
and calling them up again. You have two memory locations
available, namely "M1" and "M2". The memory is useful if you
prepare one meal particularly frequently.
In this section, you can read about
■
how to save the memory
■
how to start the memory
Saving settings in the memory
Example: use the "M1" memory location.
1. Press the main switch.
The ~ symbol lights up. Your appliance is ready for
operation.
2. Press the button for the microwave power setting you require.
The power setting lights up and a suggested cooking time is
displayed.
3. Set the cooking time using the rotary selector.
4. Press and hold the l button for a few seconds.
An audible signal sounds and "M1" appears on the clock
display for the first memory location.
You can select "M1" or "M2" using the programme selector.
5. Press and hold the l button for a few seconds.
A signal sounds. The setting is saved and can be started at any
time.
Saving another setting
Enter and save the new setting. The old settings are
overwritten.
Note: The programmes which have been set remain stored
even if there is a power cut.
Note: You can also store the series of operations option.
Starting the memory function
You can start cooking at any time using the settings saved for
your dish.