Brother MFC-8440 B - Manual (Page 73)

GETTING STARTED 4 - 5
General Setup
Setting the Mode Timer
The MFC has three temporary mode keys on the control panel: Fax,
Copy and Scan. You can change the number of seconds or minutes
the MFC takes after the last Copy or Scan operation before it returns
to Fax mode. If you select Off, the MFC stays in the mode you used
last.
1
Press Menu , 1 , 1 .
2
Press or to select
0 Sec , 30 Secs, 1 Min,
2 Mins , 5 Mins or Off.
3
Press Set .
Setting the Paper Type
To get the best print quality, set the MFC for the type of paper you
are using.
For MFC-8440
1
Press Menu , 1 , 2 .
—OR—
If you have the optional paper tray,
press
Menu , 1 , 2 , 1 to set the
paper type for Tray #1 or Menu ,
1 , 2 , 2 to set the paper type for
Tray #2 .
2
Press or to select Thin , Plain, Thick, Thicker or
Transparency .
3
Press Set .
4
Press Stop/Exit .
11.Mode Timer
▲ 0 Sec
30 Secs
▼ 1 Min
Select ▲▼ & Set
12.Paper Type
▲ Plain
Thick
▼ Thicker
Select ▲▼ & Set
12.Paper Type
1.Tray #1
2.Tray #2
Select ▲▼
& Set