Boyo - Vision Tech America VTM600M - Manual

MENU
MODE
Red wire connects anode +12v
Black wire grounded
blue wire connects to reversing lamp 12v
Video Av1 connects VCD/DVD signal input
Video Av2 connects camera singnal input
2 1 3 4 5
1.Menu: menu options (press MENU to shift different menus
2. :Analog +/- (adjust brightness,contrast,color,pos:DN Normal
(reverse image),etc.)
3.Power: power on/of(when the monitor is powered on,press
POWER button to close menu,press and hold it for
1 second to power it off)
4. :Analog +/-(adjust brightness,contrast,color,pos:DN Normal
(reverse image),etc.)
5.AV: change the Av1 or Av2
MENU
MODE
2 1
3
4
5
1.Power: power on/of(when the monitor is powered on,press
POWER button to close menu,press and hold it for
1 second to power it off)
2.Mode: change the Av1 or Av2
3.Menu: menu options (press MENU to shift different menus
4. :Analog +/- (adjust brightness,contrast,color,
pos:DN
Normal (reverse image), etc.)
5. :Analog +/-(adjust brightness,contrast,color, pos:DN
Normal (reverse image), etc.)
Card bolt
Battery
Battery slot
Back of remote controller
Model
Display resolution
System
Power consumption
Monitor dimension
Storage temperature
Operation Voltage
VTM600M
520(W)*288(H)
PAL/NTSC
8W (MAX)
10.46”(W)*4.17”(H)*1.03”(D)
DC12V
-4 F ~ ++149 F
Care instruction
1.We strongly recommend have qualified technician or maintenance to install this device.
2.If this monitor does not work well, please check the connection first .
3.For your safety, please do not watch the monitor entertainment while you are driving
Rear view 6” TFT-LCD Monitor
A.6” TFT monitor 1 B.Remote controller 1 C.User’s manual 1
1.Parts list
2.Diagram of installation
3.Functions of Button
4.Remote controller
5.Specification
A:
B:Connection
A:operations of remote controller
B:Installation of batteries
Figure (1) Figure (2)
-1- -2-