Cleaning, Emptying the dirt tray, Cleaning the roller brush – Philips Escoba eléctrica User Manual

Page 10

Advertising
background image

Cleaning

Never clean the appliance or any of its parts in water or in the

dishwasher.

1

Disconnect the appliance from the mains before you clean it.



Clean the appliance and its parts with a damp cloth.

Emptying the dirt tray

1

Always empty the dirt tray after use.



Place the stick in upright position (Fig. 7).



Press the dirt tray release button (1) and lift the dirt tray out of the

sweeper base (2) (Fig. 13).



Hold the dirt tray over a dustbin. Then press the slide on the lower

handle downwards to open the dirt tray door and empty the dirt

tray (Fig. 14).

5

Place the dirt tray back into the sweeper base and push it down

into position (Fig. 15).

The dirt tray door closes automatically when you put the dirt tray back

into the sweeper base (‘click’).

Cleaning the roller brush

1

Switch off the appliance before you clean the roller brush.



Rotate the roller brush until the cutting groove faces you. Use a

pair of scissors to cut the hairs, threads etc. that have collected

around the roller brush (Fig. 16).



Remove fluff, hairs and other dirt from the roller brush.

Note: If you are unable to clean the roller brush properly in this way, you can

remove it for more thorough cleaning. See sections ‘Removing the roller brush’

and ‘Reinserting the roller brush’ below.

English

10

Advertising
This manual is related to the following products: