Scan, Image (example: microsoft paint) – Brother MFC-8460N User Manual
Page 68
3. ControlCenter2
62
SCAN
3
There are four buttons for the Scan to Image, Scan to OCR, Scan to E-mail and Scan to File applications.
Note
You can configure your machine’s Scan key for each ControlCenter2 button in the Device Button tab.
Image
(example: Microsoft Paint)
3
The Scan to Image feature allows you to scan an image directly into your graphics application for image
editing. To change the default settings, right-click the Image button and click Configuration.
If you want to scan and then crop a portion of a page after pre-scanning the document, check Show Scanner
Interface box.
If you want to scan a duplex document, check Duplex (two-sided) Scanning and choose Long-edge
binding or Short-edge binding. (Not available for MFC-8460N, MFC-8660DN and DCP-8060)