Philips 9000 series Centrale vapeur haute pression - Manual (Page 14)

Problem Possible cause and solution
The appliance beeps
continuously.
The water tank has gone empty during the Auto Calc Clean process. Fill the
water tank.
The Calc Clean tank
light flashes.
The Auto Calc Clean process is completed. Empty the Calc Clean tank. Do
not unplug the appliance when you do this.
The cord is not wound
completely when I press
the cord rewind button.
The cord is stuck inside the cord rewind system. Pull the cord out of the
appliance and press the cord rewind button again.
Environment
Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the environment.
Guarantee & service
If you need information or if you have a problem, please visit the Philips
website at www.philips.com or contact the Philips Consumer Care Centre
in your country (you find its phone number in the worldwide guarantee
leaflet). If there is no Consumer Care Centre in your country, go to your
local Philips dealer.
-
EnGlish
1