Philips PerfectCare Expert Centrale vapeur haute pression - Manual (Page 6)

6
Introduction
This iron has been approved by The Woolmark Company Pty Ltd for
the ironing of wool only products provided that the garments are ironed
according to the instructions on the garment label and those issued by the
manufacturer of this iron. R1101. In United Kingdom, Eire, HongKong and
India, the Woolmark trademark is a Certification trademark.
General description (Fig. 1)
Important
Read the separate important information leaflet and the user manual
carefully before you use the appliance. Save both documents for future
reference.
Preparing for use
Filling the detachable water tank
Do not put hot water, perfume, vinegar, starch, descaling agents,
ironing aids or other chemicals in the water tank.
Fill the water tank before use and as soon as the ‘water tank empty’
light flashes.
1 Remove the detachable water tank from the steam generator and fill
the water tank with tap water.
Note: Your appliance has been designed to be used with tap water. If you live
in an area with very hard water, fast scale build-up may occur. In this case, it is
recommended to mix 50% distilled water and 50% tap water to prolong the
life of your appliance.
2 Slide the water tank back into the steam generator (‘click’).
’Water tank empty’ light
When the water tank is almost empty, the ‘water tank empty’ light goes on.
Fill the water tank and press the steam trigger to let the appliance heat up
again. When the ‘iron ready’ light lights up continuously, you can continue
steam ironing.
ENGLISH
1 Steam supply hose
2 Iron platform
3 Supply hose storage
compartment
4 Cord storage compartment
5 Mains cord with plug
6 ‘Water tank empty’ light
7 On/off button with ECO mode
8 EASY DE-CALC light
9 EASY DE-CALC knob
10 Water level indication
11 Detachable water tank
12 Filling hole
13 Carry lock release button
(specific types only)
14 Carry lock
(specific types only)
15 Soleplate
16 ’Iron ready’ light
17 Steam trigger
18 Steam boost button