Philips Aluminium Collection Blender - Manual (Page 6)

6
introduction
Congratulations on your purchase and welcome to Philips! To fully benefit
from the support that Philips offers, register your product at www.philips.
com/welcome.
general description (Fig. 1)
a Motor unit
B Control knob
c Blade unit interface
D Blade unit
E Sealing ring
F Blander jar with level indication
g Lid
H Graduated measuring cup
i Filter (Type HR2094 only)
important
Read this user manual carefully before you use the appliance and save it for
future reference.
general
Danger
- Never immerse the motor unit in water or any other liquid, nor rinse it
under the tap. Use only a moist cloth to clean the motor unit.
Warning
- Check if the voltage indicated on the appliance corresponds to the
local mains voltage before you connect the appliance.
- If the mains cord is damaged, you must have it replaced by Philips, a
service centre authorised by Philips or similarly qualified persons in
order to avoid a hazard.
- Do not use the appliance if the plug, the mains cord or other parts are
damaged.
- Do not lift the appliance by the handle of the blender jar, when the
blender jar is fixed to the motor unit. The motor unit may fall to the
floor and get damaged.
- Never use the blender jar to switch the appliance on and off.
- Never let the appliance run unattended.
- This appliance is not intended for use by persons (including children)
with reduced physical, sensory or metal capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety.
- Children should be supervised to ensure that they do not play with the
appliance.
- Do not touch the blades, especially when the appliance is plugged in.
The blades are very sharp.
caution
- Always unplug the appliance before you assemble, disassemble or make
adjustments to any of the parts.
EnglisH