Caution, Electromagnetic fields (emf), Before first use – Philips Studio Aspirateur avec sac User Manual

Page 7: Preparing for use, Connecting the hose

Advertising
background image

- Do not use the appliance if the plug, the mains cord or the appliance

itself is damaged.

- If the mains cord is damaged, you must have it replaced by Philips, a

service centre authorised by Philips or similarly qualified persons in

order to avoid a hazard.

- This appliance is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a person responsible for

their safety.

- Children should be supervised to ensure that they do not play with the

appliance.

- Do not point the hose, the tube or any other accessory at the eyes

or ears nor put it in your mouth when it is connected to the vacuum

cleaner and the vacuum cleaner is switched on.

Caution

- When you use the vacuum cleaner to vacuum ashes, fine sand, lime,

cement dust and similar substances, the pores of the dustbag become

clogged. As a result, the dustbag-full indicator will indicate that the

dustbag is full. Replace the disposable dustbag or empty the reusable

dustbag, even if it is not full yet (see chapter ‘Replacing/emptying the

dustbag’).

- Never use the appliance without the motor protection filter. This could

damage the motor and shorten the life of the appliance.

- Only use Philips s-bag ` synthetic dustbags or the reusable dustbag

provided (some countries only).

Electromagnetic fields (EmF)
This Philips appliance complies with all standards regarding electromagnetic

fields (EMF). If handled properly and according to the instructions in this

user manual, the appliance is safe to use based on scientific evidence

available today.

Before first use

1

Take the appliance and its accessories out of the box.

2

Remove any sticker, protective foil or plastic from the appliance.

Preparing for use

Connecting the hose

1

To connect the hose, push it firmly into the appliance (‘click’). Make

sure the recess in the hose connection fits exactly on the projection

on housing of the appliance.

EnglISh

7

Advertising
This manual is related to the following products: