3coolplus function, 4shelves, 5using the sectioned shelf – Liebherr TPesf 1710 Comfort User Manual

Page 8: 6door racks, Control

Advertising
background image

To ensure ideal temperatures for storing frozen foods, a setting

of “4” to “7” on the temperature controller is recommended.

Selecting “7” makes it possible to achieve temperatures under

0 °C in the coldest part of the fridge compartment.
An average temperature of approx. –18 °C is then established

in the freezer compartment

u

Turn the temperature control

Fig. 3 (1)

.

The temperature depends on the following factors:
- the door opening frequency

- the room temperature at the site where the appliance is

installed

- the type, temperature and quantity of frozen food

u

Adjust the temperature as needed, using the control.

5.1.3 CoolPlus function*

At low room temperatures of 18 °C or lower:

u

Press the Cool-Plus switch

Fig. 3 (2)

.

w

The deep temperatures in the freezer compartment are

ensured.

w

The appliance's interior lighting is lit on a dim setting

even when the door is closed.

Once the room temperature is again higher than18 °C :

u

Deactivate the Cool-Plus

Fig. 3 (2)

switch manually.

Note

u

At normal room temperatures, in excess of 18 °C, the Cool-

Plus switch should be turned off, as it is not required.

5.1.4 Shelves

Moving or removing shelves
The shelves have stops preventing them from being uninten-

tionally pulled out.

Fig. 11

u

Lift the shelf slightly and pull forward a little.

u

Adjust the height of the shelf. To do so, push the cut-outs

along the supports.

u

In order to remove the shelf fully, place it at a slant and pull

out towards the front.

u

Insert shelf with the raised edge pointing upwards at the

back.

w

The food does not freeze onto the rear wall.

Dismantling shelves
u

The shelves can be disman-

tled for cleaning.

5.1.5 Using the sectioned shelf

CAUTION

Danger of laceration!

The shelf may break. The broken fragments may cause lacera-

tion.

u

Remove only empty shelves.

Fig. 12

*

u

The glass shelf with stop face (2) has to be at the back.*

u

The glass plate (1) with pull-out stops must be at the front so

that the stops (3) face downwards.*

5.1.6 Door racks

Removing the storage rack
u

Remove storage rack according to

illustration.

*

Fig. 13

*

Dismantling door racks*

Fig. 14

u

The door racks can be dismantled for cleaning.

Control

8

* Depending on model and options

Advertising
This manual is related to the following products: