Brother MFC-7340 - Manual (Page 95)

Network Scanning (For models with built-in network)
88
4
j Do one of the following:
„ If you want to start scanning, press Start and go to Step m.
„ If you want to change the file name, go to Step k.
k
Press a or b to choose a file name you want to use and press OK. Press Start and go to Step m.
Note
If you want to change the file name manually, go to step l
l Press a or b to choose <Manual>. Press OK.
Enter the file name you want to use (up to 15 characters) and press OK.
Press Start.
m The LCD shows Connecting. When the connection to the FTP server is successful the machine starts
the scanning process.
Scan to FTP Manual Method
4
a Put the document face up in the ADF, or face down on the scanner glass.
b
Press (Scan).
c
Press a or b to choose Scan to FTP. Press OK.
d
Press a or b to choose <Manual>. Press OK.
Note
If there is no FTP Profile configured, skip Step d and go to Step e.
e Use the dial pad to enter the FTP host address (for example ftp.example.com’ Up to 60 characters) or
the IP address (for example 192.23.56.189).
Press OK.
f
Use the dial pad to enter the destination folder (for example /brother/abc/, up to 60 characters).
Press OK.
g Press a or b to choose Enter Username or Change Setting. Press OK.
If you choose Enter Username, go to Step k.
If you choose Change Setting, go to Step h.
h Choose one of the options below.
„ Press a or b to choose Color 150 dpi, Color 300 dpi, Color 600 dpi, Gray 300 dpi,
Gray 200 dpi or Gray 100 dpi.
Press OK and go to Step i.
„ Press a or b to choose B&W 200 dpi or B&W 200x100 dpi.
Press OK and go to Step j.
i Press a or b to choose PDF or JPEG. Press OK, and go to Step k.