Step 1 setting up the machine, 2 install the drum unit assembly, Setting up the machine – Brother BDL4231CS User Manual
Page 5: Install the automatic document feed (adf) support, Install the drum unit assembly, Step 1, 1install the automatic document feed (adf) support, 2install the drum unit assembly
Advertising
4
Setting Up the Machine
Do NOT connect the interface cable.
Connecting the interface cable is
done when installing the driver.
1
Open the ADF cover.
2
Insert the tabs of ADF support into the holes
of the ADF one side at a time.
3
Push ADF Support down until it latches in
place.
4
Close the ADF cover.
1
Open the front cover by pressing the front
cover release button.
2
Unpack the drum unit assembly.
Remove the protective part.
1
Install the Automatic
Document Feed (ADF)
Support
ADF Cover
Tab
Tab
Hole
ADF Support
2
Install the Drum Unit
Assembly
Front Cover
Release Button
Front Cover
Drum Unit
Assembly
Protective Part
Step 1
Advertising
This manual is related to the following products: