Brother BDL4231CS - Manual (Page 8)

7
Setti
ng Up
th
e Ma
ch
ine
Wi
ndo
ws
®
USB
Win
dows
®
Parallel
Wind
ows
NT
®
4.0
Para
llel
Macintosh
®
USB
Maci
ntosh
®
Ne
two
rk
Wi
ndow
s
®
Ne
two
rk
For
Adm
inistrators
Do not connect the Parallel or USB
cable yet.
1
Make sure that the power switch is off.
Connect the AC power cord to the machine.
2
Plug the AC power cord into an AC outlet.
Turn the power switch on.
3
Connect one end of the telephone line cord
to the jack on the MFC marked LINE and the
other end to a modular wall jack.
Warning
■ The MFC must be grounded using a 3-prong plug.
■ Since the MFC is grounded through the power
outlet, you can protect yourself from potentially
hazardous electrical conditions on the telephone
network by keeping the power to your MFC on
when you connect it to a telephone line. Similarly,
you can protect yourself when you want to move
your MFC by disconnecting the telephone line first
and then the power cord.
5
Install the Power Cord
and Phone Line
If Check Scan Lock appears on the LCD,
immediately release the scanner lock and
press Stop/Exit.
If you are sharing one phone line with an
external telephone, connect it as shown
below.
If you are sharing one phone line with an
external telephone answering device,
connect it as shown below.
Please set the receive mode to External
TAD.
For more details, see “Connecting the
MFC” in Chapter 1 of the User’s Guide.
TAD
TAD