Brother HL 4570CDWT - Manual (Page 45)

Driver and Software
39
2
Other Print Options
2
You can set the following in Printer Function:
 Color Calibration
 Use Reprint
 Sleep Time
 Improve Print Output
 Skip Blank Page
Color Calibration
2
The output density of each color may vary depending on the temperature and humidity of the environment
the machine is in. This setting helps you to improve color density by letting the printer driver use the color
calibration data stored in your machine.
 Use Calibration Data
If you check this box, the printer driver will use the calibration data retrieved from the machine to set color
matching in the printer driver to ensure consistent print quality.
 Start Color Calibration...
If you click this button, your machine will start color calibration and then the printer driver will attempt to
get the calibration data from your machine.
 Get Device Data Automatically
If you check this box, the printer driver will automatically get the color calibration data from your machine.
Note
If you print by using the Direct Print feature or BR-Script printer driver, you need to perform the calibration
from the control panel. See Color Calibration on page 83.
Use Reprint
2
The machine keeps the print job sent to it in memory.
You can reprint the last job without sending the data again from your computer. For more information about
the Reprint function, see Reprinting documents on page 69.
Note
If you want to prevent other people from printing your data using the reprint function, uncheck the
Use Reprint check box.