Panasonic DP2000 - Manual (Page 24)

30/05/02 Document Systems Support V1.0
24
Windows 95/98/Me/NT4/2000
Server Based Printing – Client PC’s
Important Note
Before proceeding, please make sure that the printer driver has been installed onto
your Server. For instructions on how to do this, see the appropriate section for your
Server operating system.
Stage 1
1. From your PC double click on “Network Neighbourhood”; this should give you a
list of the computers currently on your network.
2. Locate the icon for your server and then double click on it.
3. You should be able to see a printer icon for the DP copier.
4. Double click on the icon, Windows will then ask you if you wish to use this
resource and prompt you to install the relevant files.
5. Click on “Yes” and your Server will download the appropriate files to your PC.
6. Once you have done this open your Printers folder and you should see an icon
for the DP unit.
7. Do a right hand mouse click and choose “Properties”. Go to the tab “Device
Options”. Here you need to input what accessories etc you have on your unit.
Make sure the paper size is set to A4. For NT4 and 2000 users see the note
below regarding document defaults.
8. When you have finished click “Apply” then “OK”.