Cleaning instructions, Clean-up of bread maker, Clean-up of bread pan and kneading blade – Breadman TR888 User Manual

Page 21

Advertising
background image

20.

CLEANING INSTRUCTIONS

CAUTION: Always unplug the bread maker and allow to cool completely before clean-
ing. Carefully unpack the bread maker and remove all packaging materials.

Clean-up of bread maker

1.

Unplug and allow to cool before cleaning.

2.

Remove the Bread Pan from inside the bread maker.

3. Clean exterior of bread maker with a damp cloth and

plastic scouring pad if necessary. Do not rub too hard as
the surface may become scratched.

4. Remove any flour, bread crumbs or other food from the

inside of the oven cavity using a damp sponge, cloth or a
small portable vacuum cleaner. A plastic scouring pad
may be used if necessary. Do not rub too hard as the sur-
face may become scratched.

5. To clean the glass in the Lid, use a glass cleaner or mild

detergent and a damp cloth or plastic scouring pad. Do
not use an abrasive cleaner or pad as they might scratch
the glass.

6.

Rinse with a damp cloth and dry thoroughly.

Clean-up of bread pan and kneading blade

CAUTION: Do not immerse Bread Pan or wash in dishwasher.

1.

Allow to cool before cleaning.

2. Fill with hot soapy water and remove Kneading Blade. If

necessary to remove the Kneading Blade from the Bread
Pan, allow the soapy water to remain in the pan for up to
30 minutes (longer times may damage the non-stick sur-
face). It is not necessary to remove the Kneading Blade
for cleaning, but if you wish to, it must be removed after
each use otherwise it will become very difficult to
remove.

3. Wash Bread Pan and Kneading Blade with a nylon bristle

brush. Do not use steel wool, abrasive cleaners or metal
utensils on the Bread Pan or Kneading Blade as they will
damage the non-stick surface. Normal wear is to be
expected. The non-stick may discolor over time but that
in no way affects performance.

Advertising