Brother MFC 8840D A - Manual (Page 166)

8 - 1 NETWORK SCANNING
8
To use the machine as a Network Scanner, the NC-9100h Network
board should be installed into the machine and configured with
TCP/IP and mail server settings if you use Scan to E-mail (E-mail
server). You can set or change NC-9100h settings from your
machine’s control panel, with the BRAdmin Professional utility and
with Web Management BRAdmin. (Please see the NC-9100h
Network User's Guide on the CD-ROM.)
Network License
This product includes a single PC license. If you purchase an
optional Network LAN board NC-9100h that includes the license for
up to 4 additional Users, you can install the MFL-Pro Software Suite
including ScanSoft
® PaperPort ® 9.0SE on up to 5 PCs for use on a
network. If you want to use more than 5 PCs with ScanSoft ®
PaperPort
®
9.0SE installed, please purchase NL-5 which is a
multiple PC license agreement pack for up to an additional 5 Users.
To purchase NL-5, please contact your Brother Sales Office.
Registering your PC with the machine
If you need to change the machine that was registered to your PC
during the installation of MFL-Pro, follow the steps below.
1
For Windows ® 98/Me/2000
From the Start menu, select Control Panel, Scanners and
Cameras, and then right-click Scanner Device icon and select
Properties to view the Network Scanner Properties dialog box.
For Windows
®
XP
From the Start menu, select Control Panel, Printers and
Other Hardware, Scanner and Cameras (or Control Panel,
Scanners and Cameras).
Network Scanning
(Windows
®
98/98SE/Me/2000 Professional and XP only)
The screens shown in this chapter are from MFC-8840D.
Max. 25 clients can be connected to one machine on a Network.
For example, if 30 clients try to connect at a time, 5 clients will
not be shown on the LCD.