Brother FAX-T104 Series - Manual (Page 29)

On-Screen Programming
3 - 2
Navigation keys
You can access the menu mode by pressing Menu/Set.
When you enter the menu, the LCD
scrolls.
Press 1 for Initial Setup
—OR—
Press 2 for Setup Receive menu
—OR—
Press 3 for Setup Send menu
—OR—
Press 4 for Cancel Job menu
—OR—
Press 5 for Interrupt menu
—OR—
Press 6 for Set Quick-Dial menu
—OR—
Press 7 for Setup Reports menu
—OR—
Press 8 for Remote Fax Opt menu
(FAX-T104 only)
Press 8 for Setup TAD menu
(FAX-T106 only)
—OR—
Press 9 for Setup Melody menu
(FAX-T106 only)
—OR—
Press 0 for Miscellaneous menu
You can scroll more quickly through each menu level by pressing
the arrow key (
▲ or ▼) for the direction you want. Select an option
by pressing Menu/Set when that option appears on the LCD.
Then the LCD shows the next menu level.
Press
▲ or ▼ to scroll to your next menu selection.
Press Menu/Set. When you finish setting an option, the LCD
shows ACCEPTED.
Access the menu
Go to the next menu level
Accept an option
Scroll through the current
menu level
Go back to the previous menu
level
Go forward to the next menu
level
Exit the menu
SELECT
↑ ↓
& SET
1.INITIAL SETUP
2.SETUP RECEIVE
3.SETUP SEND
4.CANCEL JOB
5.INTERRUPT
6.SET QUICK-DIAL
7.REPORT SETTING
8.REMOTE FAX OPT
8.SETUP TAD
9.SETUP MELODY
0.MISCELLANEOUS