Brother FAX-T104 Series - Manual (Page 42)

5 - 2
Setup Receive
To select or change your Receive Mode
1
Press Receive Mode.
The LCD shows your current selection.
The options on FAX-T104 are:
The options on FAX-T106 are:
Or, if TAD Mode is switched
ON
by pressing (Digital
TAD button), it overrides your
Receive Mode setting, so the display shows:
2
Continue to press Receive Mode until your new selection
appears. After 2 seconds, the screen returns to the date and
time display, along with your new Receive Mode setting.
Setting the Ring Delay
The Ring Delay sets the number of times the fax machine rings
before it answers in FAX ONLY or FAX/TEL and TAD:MSG MGR
modes. (FAX-T106 only)
1
Press Menu/Set, 2, 1.
If you have a FAX-T104, go to Step 3.
2
Press
▲ or ▼ to select RING DELAY, and press Menu/Set.
3
Press
▲ or ▼ to select how many times the line rings before
the machine answers, and press Menu/Set.
4
Press Stop/Exit.
If you are changing the Receive Mode while in another
operation, the screen returns to the current operation display.
(FAX-T106 only)
Toll Saver must be OFF to use the Ring Delay setting.
09/06 15:25 FAX
Current Receive Mode
MNL : MANUAL
FAX : FAX ONLY
F/T : FAX/TEL
TAD:ANSWER MACH.
(FAX-T104 only)
TAD:MSG MGR
(FAX-T106 only)
FAX ONLY
FAX/TEL
TAD:ANSWER MACH.
MANUAL
FAX ONLY
FAX/TEL
MANUAL
TAD:MSG MGR