Brother FAX-T104 Series - Manual (Page 54)

5 - 14
Setup Receive
BT Call Sign (U.K. only)
This fax machine feature lets you use the BT Call Sign subscriber
service which allows you to have at least two separate telephone
numbers on one phone line. Each phone number has its own
distinctive ringing pattern, so you know which phone number is
ringing. This is one way you can have a separate phone number
for your machine.
Your fax machine has a BT Call Sign compatible distinctive ringing
function, allowing you to dedicate a second phone number (on the
same phone line) just for receiving faxes.
To enable the machine to work with BT Call Sign
(Only with your external phone)
1
Press Menu/Set, 0, 4.
The screen displays the current setting of this feature.
2
Press
▲ or ▼ to select ON (or OFF).
Press Menu/Set.
3
Press Stop/Exit.
You can switch BT Call Sign off temporarily, then turn it back
on. When you get a new fax number, make sure you reset this
function. This fax machine will automatically answer incoming
calls that use your new fax number.
When you set the BT Call Sign feature to ON, the receive
mode is set to MANUAL automatically. You cannot change the
receive mode to any other mode while the BT Call Sign
feature is set to on.
(If you are using FAX-T106 and set TAD mode, the machine
stays in TAD:MSG MGR mode.)
If you turn off the BT Call Sign feature on your fax machine,
the receive mode stays MANUAL. You need to set the receive
mode again.