Brother FAX-T104 Series - Manual (Page 65)

Setup Send
6 - 11
Setting up Polled Transmit (Standard)
Polled Transmit is when you set up the fax machine to wait with a
document so another fax machine can call and retrieve it.
1
Insert the document face down in the ADF.
2
Press Menu/Set, 3, 8.
3
Press
▲ or ▼ to choose
STANDARD .
Press Menu/Set.
4
Press 1 if you want to leave the
document in the ADF.
—OR—
Press 2 to scan the document into the memory.
5
Press 1 if you want to choose more settings and the LCD will
return to the SETUP SEND menu.
—OR—
Press 2 if you have finished choosing settings, and go to
step 6.
6
Press Fax Start.
Setup for Polling Transmit with Secure Code
When you choose POLLING:SECURE, anyone who polls your
machine must enter the polling secure code.
1
Insert the document face down in the ADF.
2
Press Menu/Set, 3, 8.
3
Press
▲ or ▼ to choose
SECURE , and press Menu/Set.
4
Enter a four-digit number, and press Menu/Set.
5
Press 1 to select DOC if you want your machine to scan the
printed document at the time it is polled.
—OR—
Press 2 to select MEMORY to
scan the document into
memory.
■
If you pressed 1 in Step 4, the document remains in the
ADF until your fax machine is polled. If you must use your
fax machine before the polled Transmit occur, you can
“interrupt” it to send another fax. (See Interrupting Delayed
Fax and Polled Transmit jobs on page 6-13.) The
document in the ADF can only be polled once.
■
If you pressed 2 in Step 4, the document will be stored in
the memory and can be retrieved from any other fax
machine until you delete the fax in memory by using the
Cancelling a Job menu setting.
8.POLLED TX
POLLING:STANDARD
1.DOC 2.MEMORY
8.POLLED TX
1.DOC 2.MEMORY