Philips SE7452B-37 - Manual (Page 18)

16 Using your phone
5 Using your phone
5.1 Make a call
5.1.1 Predialling
Dial the number (maximum 24 digits).
Press
r
key.
• The call is initiated.
Tip
You may insert a prefix number to the beginning
of your predial number, see “Set Auto Prefix” on
page 33 for more information.
5.1.2 Direct dialling
Press
r
key to take the line.
Dial the number.
• The call is initiated.
5.1.3 Call from redial list
Press
>
REDIAL key in idle mode.
Scroll
:
to an entry in the redial list.
Press
r
key.
• The call is initiated.
Tip
The handset stores the last 20 numbers dialled.
The last number dialled will appear first in the
redial list. If the redial number matches a
phonebook entry, the name will be displayed
instead.
5.1.4 Call from the call log
Press
u
in idle mode. Scroll
:
to Call List or
Answ. Machine and press
m
SELECT to enter
the respective sub-menus.
5.1.4.1 To choose the format for call log
display
You must choose the correct format to dial the area
code and number of the call log record chosen. The
original incoming number from the call log will
appear as a 7, 10 or 11-digit number. If it is a long
distance call, the prefix digit 1 will automatically
appear in front of the 10-digit local calls.
When viewing the call log, press
*
to
change the format of the call log display as it
should be dialled from your location. For
example, if the call log entry appears as “234-
567-8900”:
• Press
*
once to display “1-234-567-8900”
• Press
*
twice to display “567-8900”
• Press
*
3 times to display “1-567-8900”
• Press
*
4 times to display “1-234-567-8900”
again.
To dial the current displayed number, press
r
key.
• The call is initiated.
Note
You need to subscribe to Caller Line
Identification service to be able to see the caller’s
number or name in the call log (see “Access Call
log” on page 23).
When saving the call list entry to phonebook, the
original incoming number will be saved instead of
the current displayed number.
If the first 3 digits of the incoming number
corresponds to the local area code set in your
phone, they will be filtered automatically when
you press the
r
or
v
key to dial. To change
the local area code, please refer to “Set Area
Code” on page 30.
5.1.5 Call from the phonebook
Press
d
in idle mode.
Scroll
:
to a phonebook entry.
Press
r
key.
• The call is initiated.
Tip
Instead of scrolling
:
to browse the phonebook
entries, you can press the numeric key
corresponding to the first letter of the entry you
wish to locate. For example, pressing
2
will
show the entries starting with A. Pressing
2
again will show the entries starting with B, etc...
1
2
1
2
1
2
3
1
2
1
2
3