Brother FAX-575 - Manual (Page 38)

4 - 1
Initial Setup
Getting started
Setting the Date and Time
When the fax machine is not in use, it will display the date and time.
If you set up the Station ID the date and time displayed by your fax
machine will be printed on every fax you send. If there is a power
failure, you may have to reset the date and time.
1
Press Menu/Set, 1, 1.
2
Enter the last two digits of the
year.
Press Menu/Set.
3
Enter two digits for the month.
Press Menu/Set.
(For example, enter 09 for September, or 10 for October.)
4
Enter two digits for the day.
Press Menu/Set.
(For example, enter 06.)
5
Enter the time in 24-Hour format.
Press Menu/Set.
(For example, enter 15:25 for 3:25 P.M.)
6
Press Stop/Exit.
The LCD now shows the date and time whenever the fax
machine is in Standby mode.
Turning on Automatic Daylight Savings Time
You can set the fax machine to change automatically for Daylight
Savings Time. It will reset itself forward one hour in the Spring and
backward one hour in the Fall. Make sure you have set the correct
day and time in the DATE/TIME setting. The default setting is OFF.
1
Press Menu/Set, 1, 5.
2
Press
▲ or ▼ to select ON (or
OFF ).
Press Menu/Set.
3
Press Stop/Exit.
4
Initial Setup
1.DATE/TIME
5.AUTO DAYLIGHT