Poison Spyder JK A-PILLAR LIGHT BAR MOUNTS FOR RIGID 50 LED - Manual

©2011 POISON SPYDER CUSTOMS, INC. • 951-849-5911 • WWW.POISONSPYDER.COM
INSTALLATION INSTRUC
TIO
NS
JK A-PILLAR LIGHT BAR MOUNTS FOR RIGID 50” LED
Thank you for purchasing Poison Spyder
products for your Jeep. Installation is fairly simple
with the right tools and good mechanical abilities.
If you are not confident in your mechanical skills,
please seek the help of a professional to perform
the installation. Please read through these entire
instructions before proceeding with installation.
IMPORTANT: Completely install and remove
these items prior to painting or powder coating.
This will allow you to check for fitment or do any
clearancing or fitting ahead of time, to reduce
the chance of damage to the finish during final
installation. Poison Spyder Customs Inc. is not
responsible for costs for or damage to paint or
powder coat finish under any circumstances,
including paint or powder coat of incorrectly
shipped or defective parts.
PARTS LIST
Please check your packages immediately upon
arrival to ensure that everything listed is included,
and to check for damage during shipping. If
anything is missing or damaged, call Poison
Spyder at (951) 849-5911 as soon as possible.
(1) Driver Side A-Pillar Light Bar Mount
(1) Passenger Side A-Pillar Light Bar Mount
(1) Driver Side A-Pillar Rubber Liner
(1) Passenger Side A-Pillar Rubber Liner
INSTALLATION NOTES
•
Re-use the factory hardware at the lower
corners of the windshield brackets.
• This product is designed exclusively for
mounting the Rigid Industries 50” E-Series or
SR-Series LED light bars. No guarantee is
made regarding fitment of other brands of light
bars.
• Routing of electrical cables is left to the
installer’s discretion. We have seen several
different methods of routing the cable, we
encourage you to do a search on the web for
ideas and tips for routing the cables.
• With the SR-Series (single row) light bar, If
the light bar produces an annoying whistle or
harmonics at highway speeds, try flipping it
over. We have had the best results with the
light bar flipped so that the cables route down
the driver’s side.