Hyline Offroad JK TUBE STEP ROCKER PANELS (2 DOOR MODELS) - Manual

Q:\Hyline Offroad, LLC\Installation Instructions\400.300.110-JK ROCK SLIDER (2 DOOR)\400.300.110 Installation Instructions.doc Page 1 of 4
REV 1 1/21/14
Proudly Made In USA
Installation Instructions:
JK Tube Step Rocker Panel
Part Number: 400.300.110 Vehicle Fitment:
2007-Present Jeep Wrangler
2-Door Only
Parts List
Qty:
1 Driver Rock Slider – RED Dot
1 Passenger Rock Slider – GREEN Dot
1 Driver Drill Template – RED Dot
1 Passenger Drill Template – GREEN Dot
8 3/8-16 Gr 5 Hex Nuts
8 3/8” USS Flat Washers Gr 5
8 3/8” Split Lock Washers Gr 5
4 3/8-16 Threaded U-Bolts
4 Square Plastic End Caps
8 3/8” Retaining Rings
Tools Needed
Ratchet & Sockets
5/8”, 9/16” 18mm &
19mm
Drill
3/16” & 1/2”
Multi-Depth or Step
Drill Bit Recommended
Congratulations on your purchase of the Hyline Offroad Rock Sliders. All of our products are
completely manufactured in our facility located in Perkasie, PA. They are designed and engineered by
Offroad enthusiasts just like you to be rock solid. Hyline Offroad would like to thank you for your
recent purchase and look forward to serving you in the future.
Hyline Offroad Staff
Safety Glasses