Hyline Offroad JK SERIES TIRE CARRIER READY REAR BUMPER User Manual
Proudly made in, Parts list, Tools needed
T:\Hyline Offroad, LLC\Installation Instructions\JK-20SRB\JK-20SRB Installation Instructions.doc
Page 1 of 4
REV 1 3/17/2010
Proudly Made In
USA
Installation Instructions:
JK Standard Rear Bumper
Part Number: JK-20SRB(T)
Vehicle Fitment:
2007-Present Jeep Wrangler &
Unlimited
Parts List
Qty:
1 Standard Rear Bumper
2 Inner Frame Mounting
Brackets
4 ½-13 Gr8 Hex Bolts
4 1/2” Gr8 Flat Washers
4 1/2” Gr8 Lock Washers
Tools Needed
Ratchet
16mm Socket
18mm Socket
3/4” Socket
Torque Wrench
Congratulations on your purchase of the Hyline Offroad Standard Rear Bumper. Our Bumpers are
completely manufactured in our facility located in Perkasie, PA. They are designed and engineered by
Offroad enthusiasts just like you to be rock solid at an affordable price. Hyline Offroad would like to
thank you for your recent purchase and look forward to serving you in the future.
Hyline Offroad Staff