Hornady Sonic Cleaner 220V - Manual

Lock-N-Load
®
Sonic Cleaner TM
Thank you for purchasing the Hornady Lock-N-Load
® Sonic Cleaner TM . Please read these instructions before using this
machine. If you have any questions about this accessory, contact us at 1-800-338-3220.
The Hornady Lock-N-Load
®
Sonic Cleaner
TM
removes carbon residue from the inside and outside of cartridge cases with
high frequency ultrasonic energy and a specialized cleaning solution. Unlike case tumblers, the Lock-N-Load
®
Sonic
Cleaner
TM
effectively cleans the inner surfaces of cartridge cases as well as the primer pockets. The Lock-N-Load
®
Sonic
Cleaner
TM
features a 1 quart stainless steel tank, removable basket and a digital timer with five cycles. Lock-N-Load
®
Sonic Cleaner
TM
may also be used to clean other small parts.
The primary function of the Lock-N-Load
®
Sonic Cleaner
TM
is to chemically and mechanically clean a variety of items. Not
all carbon buildup and tarnish may be removed from cases due to the corrosive nature of some primer residue and/or
deep corrosion. To create bright and polished brass we recommend using the Hornady Case Tumbler and One Shot™
Tumbler Media.
IMPORTANT SAFETY FUNCTIONS
WARNING - Before operating the unit, please carefully read and understand this document.
1.) Only use Hornady approved cleaners such as One-Shot TM Sonic Clean Brass Solution or One-Shot TM Sonic Clean
Gun Solution.
2.) Leave the machine unplugged until you are ready to clean cases and have read these instructions.
3.) Unit must be unplugged when filling or emptying tank.
4.) Do not overfill tank.
5.) Do not place hands in unit while unit is running.
6.) Do not plug in or unplug unit with wet hands.
7.) Do not immerse unit in water.
8.) Do not place cases or other objects directly on the bottom of the tank. ALWAYS use the basket.
9.) Do not operate unit if power cord is damaged, the unit has been submerged in water, or appears damaged.
10.) Do not leave plugged in and/or unattended.
11.) Do not operate unit without water and/or cleaner in tank.
12.) Do not operate the unit for longer than 24 minutes without allowing the unit to cool for at least 3 minutes.
13.) Do not put easily discolored items into tank such as clothing, leathers, wood etc.
14.) Do not put electrical devices into unit that are not waterproof.
15.) Do not clean eyewear frames or artwork made from shell or hawksbill.
16.) We do not recommend cleaning aluminum parts in the unit. This unit may damage low grade and/or thin aluminum.
Use caution.
17.) Do not leave cleaning solution in tank for an extended period of time.
18.) Keep unit away from direct heat sources.
19.) Store unit in a dry, flat place.