Hornady GS-1000 - Manual

AUTO OFF:
This unit comes with an auto-off feature to conserve battery power.
The scale will automatically turn off after approximately four minutes of
inactivity.
CAUTION:
Do not place more than the capacity of the scale on the weighing platform.
Abuse of this type can cause damage to the scale and void the warranty.
This scale is a sensitive electronic instrument. Avoid vibrations, strong
electrical or magnetic fields, and rapid changes in humidity or temperature
as they can adversely affect accuracy.
CARE AND MAINTENANCE:
• Avoid lengthy exposure to extreme heat or cold. To achieve optimum
functioning, allow this unit to acclimatize.
• Allow scale a minimum of thirty seconds to warm up before calibration to
allow internal components to stabilize.
• Keep this product clean. Dust, dirt, and moisture can adversely affect the
reliability and accuracy of this scale.
• Vibrations, air currents and proximity to other electronic equipment may
affect accuracy of this product. Avoid disturbing the environmental conditions
when weighing. Be sure weighing is done with scale on a flat surface in a
sheltered area.
• Handle with care. Although this product is durable, rough treatment may
permanently damage the internal sensor.
Hornady Electronic Scale
Instruction Manual
Model GS-
1000
Congratulations on your selection of a quality Hornady product.
With proper care and use, this product will provide years of
dependable service. Hornady is committed to providing products
that fit your needs, manufactured to the highest of quality standards.
If you have any comments or suggestions concerning this product
please mail them to:
Hornady Manufacturing
P.O. Box 1848
Grand Island, NE 68802-1848 USA
www.hornady.com
Please read all the operating instructions to ensure the best performance
from your Hornady Electronic Scale.
CAPACITY/ACCURACY:
1000grain/65grams x 0.1grain/0.01gram
POWER SOURCE:
Four “AA” alkaline batteries or 120 Volt AC adapter
(output DC 6V 100mA)
BATTERY INSERTION:
1. Turn scale upside down and locate battery compartment cover.
2 . Push tab toward compartment cover. Lift cover off.
3. Insert four “AA” alkaline batteries; ensure that battery polarities
are aligned properly.
4. Replace battery compartment cover and secure.
5. The scale is now ready for use.
Note: Do not use excessive force in removing or replacing battery
compartment cover.