Bard WUVCLP-A - Manual

WALL MOUNT SERIES UV LIGHT PACKAGE
Model: WUVCLP-A & WUVCLP-C
READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE PROCEEDING WITH THE INSTALLATION
LEAVE THE INSTALLATION INSTRUCTIONS WITH THE OWNER/OPERATOR OF THE DEVICE
AFTER OPENING THE CARTON, UNPACK AND INSPECT THE UNIT AND LAMP FOR DAMAGE.
DO NOT INSTALL THIS UNIT IF ANY DAMAGE IS NOTICEABLE.
SAFETY CONSIDERATIONS
WARNING: Never expose eyes or skin to UVC light from any source.
• Looking directly at the UVC light may cause permanent eye damage or blindness.
• Never operate the UV Air Purifying System out of the plenum.
WARNING: UV light will break down plastic materials not rated for UV exposure:
(Examples: wire insulation, flex duct, drain pans and humidifiers)
• The unit must be mounted at least 30” from the above stated type of materials.
• If it is necessary to mount the unit in direct line of site of these types of materials, they must be
shielded with aluminum foil, aluminum foil tape, or sheet metal.
The WUVCLP light package should only be installed by a trained heating and
air conditioning technician. These instructions are not intended to be a step-
by-step procedure that the mechanically inclined owner can use to install the
WUVCLP light package. Rather these instructions serve as a guide to the
technician installing the WUVCLP light package
Bard Manufacturing Company Manual No.: 2100-432
Bryan, Ohio 43516 Supercedes:
File: Vol III Tab 19
Since 1914…Moving ahead, just as planned. Date: 2/14/03