PHCC Pro Series Pro Series 2200 Battery Backup Sump Pump System - Manual

•
•
•
•
•
•
•
•
•
The fluid in the battery is low. Add distilled water.
The battery terminals are corroded or the battery is defective.
Clean the terminals or replace the battery.
The unit is not receiving AC power. Check the plug or circuit breaker.
To silence the alarm during emergencies, press the button for 5 seconds.
The pump is defective or not connected. Check plug or replace pump.
The pump was activated. Check the main pump for failure.
To silence the alarm during emergencies, press the button for 5 seconds.
100%
75%
50%
25%
Battery power level
Warning alarms
Push button 1 second to test or reset alarm.
Push 5 seconds to silence alarm for 24 hours.
Battery Backup
Sump Pump System
Instruction
Manual