PHCC Pro Series Pro Series 1000 Battery Backup Sump Pump System (with silence switch) - Manual

IMPORTANT: Even if you have the Pro Series 1000
backup sump pump system installed by someone
else, you must read and follow the safety
information contained in this manual. Failure to
do so could result in property damage, serious
injury, or death.
Battery Backup
Sump Pump
System
Instruction
Manual & Safety
Warnings
Table of Contents
Important Safety Warnings and
Instructions
Electrical precautions
1
Battery preparation 1
Battery precautions 1
Introduction
Items included in system
2
Additional items needed 2
Replacement parts list 2
System specifications 2
Pump & Pipe
Installation Instructions
Installation options
3
Direct discharge to outside 4
Connection to existing discharge 5
Direct discharge for narrow sumps 6
Connection to existing discharge
for narrow sumps
7
Battery Instructions 8
Control Unit Connections
Mounting the control unit
9
Positioning the float switch 9
Connecting the pump 9
Installing the battery fluid sensor 9
Connecting the battery 9
Connecting the charger 9
Understanding the Warning
Lights and Alarms
Silencing the alarm during
an emergency
10
Power alarm 10
Fluid low alarm 10
Refilling the battery 10,11
Pump activated alarm 11
Replacing the pump 11,12
System operating 12
Cleaning battery terminals 12,13
Replacing the battery 13
Testing the System
Testing the pump
14
Testing the float switch 14
Parts & Service Information
Technical support
14
Troubleshooting Guide 14
Warranty 15
Other Products 15