PHCC Pro Series Pro Series C22 - Manual

Instruction Manual & Safety Warnings
Table of Contents
Important Safety Warnings and
Instructions
Electrical precautions 1
Battery preparation 1
Battery precautions 1
Introduction
Items included in system 2
Additional items needed 2
System specifications 2
Installing the Pipe and Pump 3
Battery Instructions 4,5
System Connections
Connecting the backup pump 5
Installing the battery fluid sensor 5
Connecting the battery 6
Connecting the charger 6
Connecting the primary pump 6
Product Operation
Float switches 6
1/8” weep holes 6
Controllers 6
Understanding the Warning
Lights and Alarms
Silencing the alarm during
an emergency
7
Battery alarm 7
Cleaning battery terminals 7,8
Replacing the battery 8,9
Fuse alarm 9
Fluid alarm 9,10
Backup pump activated 10
Replacing the backup pump 10,11
Replacing the primary pump 11-13
Power alarm 13
Charging 13
System operating 13
Testing the System
Test-Reset-Silence button 13
Testing the backup float switch 13,14
Testing the primary float switch
14
Maintenance Check List 14
Parts & Service Information
Technical support 14
Replacement Parts Diagram & List 15
Troubleshooting Guide 16
Warranty 17
Pro Series C22
Combination Primary and
Backup Sump Pump System
IMPORTANT: Even if you have the Pro Series C22 Combination Sump Pump System
installed by someone else, you must read and follow the safety information contained in
this manual. Failure to do so could result in property damage, serious injury, or death.
This manual is for the
systems that have the
PHCC1730-A backup
controller, which can
accommodate maintenance
or maintenance free
batteries. See pages 2-6
for additional information.