AEM 30-3439 AEMnet Adapter for Wideband Failsafe 30-4900 - Manual

30-3439 AEMnet HARNESS INSTALLATION INSTRUCTIONS
ENGINEER: JT DATE LAST MODIFIED: 7/9/2013 Page 1 of 4
Overview
The following instructions describe the proper installation of the AEMnet Harness
(30-3439), which is used to connect the Wideband Failsafe AEMnet
communication lines to a second (or multiple) AEMnet device(s).
Included Items
Item # Description Req. Quantity
30-3439 AEMnet Harness for Wideband Failsafe 1
Steps
1. Step 1 is Optional -
Disconnect the Wideband Failsafe 16-pin harness connector from the
Wideband Failsafe gauge. The harness connector has a latch on the bottom
side that needs to be squeezed as the connector is lightly freed from the
gauge. Refer to Figure 1 below.
Figure 1