Baby Jogger MP3 Player - Manual

MP3 Console
Instructions
Box Includes:
1 MP3 Console
Requires 2 AAA batteries
(not included)
NOTE: MP3 player not included
2 Fasten snap around handle
bar on right side. Repeat on
left side.
NOTE: There are three
different snap locations
depending on the shape
of your stroller’s
handlebar. Use the snaps
that best fit your stroller.
3 Place MP3 player in mesh pocket. Thread cord
through the bottom opening of mesh pocket.
4 Plug cord into MP3 player.
5 Slide speaker switch to
“ON” position (a green
light will appear next to
the switch). Turn MP3
player on.
Center console divider can
be moved to create a larger storage
space or to cover speaker controls.
1 Insert 2 AAA batteries into battery compartment.
1 Remove plug from MP3 player and unthread from
mesh pocket.
2 Unfasten Velcro on bottom
of speaker box.
3 Unzip speaker box.
8575 Magellan Parkway, Suite 1000 • Richmond, VA 23227 • T: 800-241-1848 • F: 804-262-6277 • www.babyjogger.com
The sample product shown on this manual
may differ slightly from your production
quality MP3 Console. However, this will
not affect the assembly or functionality
of your Baby Jogger product.
WARNING:
Remember to turn
off speaker power
switch when
finished.
WARNING:
To prevent theft of
MP3 player, do not
leave MP3 Console
unattended.
To remove speaker box: