Brother HL-2170W - Manual (Page 32)

Installing the Printer Driver
30
STEP 2
Macintosh
®
Mac
int
os
h
®
USB
4
For USB interface cable users
Connecting the printer to your Macintosh ® and
installing the driver
1
Connect the USB interface cable to your
Macintosh
® , and then connect it to the printer.
Improper Setup
DO NOT connect the printer to a USB port on a
keyboard or a non-powered USB hub.
2
Make sure the printer power switch is on.
3
Turn on your Macintosh ® . Put the supplied CD-
ROM into your CD-ROM drive.
4
Double-click the HL2100 icon on your desktop.
Double-click the Start Here icon. Follow the
on-screen instructions.
5
Click Install Printer Driver on the menu
screen.
6
Click USB cable users and follow the
on-screen instructions. Then, restart your
Macintosh
® .
For Mac OS
®
X 10.2.4 to 10.2.8 users:
Go to step 9.
For Mac OS
®
X 10.3 or greater users:
Go to step 7.
7
The Brother software will search for the Brother
printer. During this time the following screen
will appear.
8
When this screen appears, click OK.
For Mac OS ® X 10.3 or greater users:
Setup is now complete.