Lull 1044C-54 Series II Service Manual - Manual (Page 222)

Boom and Transfer
6-80 31200079
Fig. 6-86: Chain and Hose Guide Assembly
37. (Ref. Fig. 6-86) Remove chain and hose guide assembly from rear of
middle (rear) boom section as follows:
a. Remove chain and hose roller shaft (Item 13) from rear of middle
(rear) boom section. Remove chain and hose roller assembly.
b. Remove two (2) lock nuts (Item 9) and capscrews (Item 3).
c. Separate two (2) each right hand hose guides (Item 4), washers
(Item 2), roller bushings (Item 1), hose guide spacers (Item 5),
hose spacers (Item 6), plastic bushings (Item 7), and left hand
hose guides (Item 8) from chain and hose roller (Item 12).
d. Remove two (2) chain roller washers (Item 10) and the hardened
bushing (Item 11) from the chain and hose roller.
J
1238
13
14
15
2
3
4
5
6
7
8
10
11
12
10
4
3
7
5
6
2
8
9
9
1
1
# Description
1 Roller Bushing
2 Washer
3 Capscrew
4 Right Hand Hose Guide
5 Hose Guide Spacer
6 Hose Spacer
7 Plastic Bushing
8 Left Hand Hose Guide
# Description
9 Lock Nut
10 Chain Roller Washer
11 Hardened Bushing
12 Chain and Hose Roller
13 Chain and Hose Roller Shaft
14 Grease Fitting
15 Grease Fitting Cover