Lull 1044C-54 Series II Service Manual - Manual (Page 29)

Safety
31200079 1-7
Attaching Decals
The surface on which a decal is to be attached must be dry and free of all
dirt and grease. Remove the backing from the decal and apply decal in its
correct location. Once in place, rub entire surface of the decal with your
thumb, applying sufficient pressure to ensure good adhesion of the decal
to the mounting surface.
Decal Locations
Decals and placards that provide information, instructions, and address
safety issues include the following:
• Attachment Capacity Plate (Fig. 1-7)
• Boom Extension Indicator Decal (Fig. 1-1)
• Boom Movement Control Decal (Fig. 1-3)
• Cab Transfer Extension Decal (Fig. 1-1)
• California Proposition 65 Warning Decal (Fig. 1-1)
• Carriage Safety Decal (Fig. 1-7)
• Carry Load Low Caution Decal (Fig. 1-2)
• Caution Plate (Fig. 1-1)
• Diesel Fuel Only Decal (Fig. 1-6)
• Disconnect Battery Decal (Fig. 1-4)
• Don’t Be Careless Decal (Fig. 1-2)
• Forklift Signals Decal (Fig. 1-1)
• Frame Tilt Control Decal (Fig. 1-3)
• Frame Transfer Extension Decal (Fig. 1-1)
• Hydraulic Breather Decal (Fig. 1-6)
• Hydraulic Oil Only Decal (Fig. 1-6)
• Load Chart Capacities Flip Card (Fig. 1-1)
• Low Brake Pressure Decal (Fig. 1-2)
• Lubrication Schedule Flip Card (Fig. 1-1)
• Notice Decal (General Operating Instructions) (Fig. 1-1)
• Outrigger Caution Decal (Fig. 1-2)
• Outrigger Control Decal (Fig. 1-3)
• Parking Brake Decal (Fig. 1-2)
• Pressure Test Ports Decal (Fig. 1-1)
• Rear Oscillation Lock Light Decal (Fig. 1-2)
• Slow Moving Vehicle Sign (Fig. 1-4)
• Steer Selector Plate (Fig. 1-5)
• Tire Ballast Required Decal (Fig. 1-1)
• Transfer and Fork Tilt Control Decal (Fig. 1-3)
• Transmission Declutch Decal (Fig. 1-2)