Frame tilt cylinder – Lull 1044C-54 Series II Service Manual User Manual

Page 290

Advertising
background image

Frame Tilt and Oscillation

7-8

31200079

Frame Tilt Cylinder

Description

Fig. 7-5: Frame Tilt Cylinder

(Ref. Fig. 7-5) The frame tilt cylinder is located near the front of the
machine, on the right side. The cylinder is mounted vertically with the base
end secured to the frame and the rod end mounted to the front axle.

With the engine running, moving the frame tilt control valve handle (see
page 7-3) to the right causes the cylinder to retract and the frame tilts to
the right. Moving the tilt control handle to the left causes the cylinder to
extend and the frame will tilt to the left.

There are conditions during normal machine operation when the frame tilt
cylinder cannot be actuated. See “Rear Oscillation Lock System” on
page 7-17 for further information.

Frame Tilt

Cylinder

G

1020

Advertising