Driving hazards on slopes, Driving hazards on slopes -9 – Lull 944E-42 Operation Manual User Manual

Page 19

Advertising
background image

Section 1 - General Safety Practices

1-9

31200354

Driving Hazards on Slopes

To maintain sufficient traction and braking capabilities, travel on slopes as follows:

• When unloaded, drive with forks pointed downhill.

• When loaded, drive with the forks pointed uphill.

• For additional travel requirements, refer to the appropriate capacity chart.

• To avoid overspeeding the engine and drivetrain when driving down slopes,

downshift to a lower gear and use the service brake as necessary to maintain a
slow speed. DO NOT shift into neutral and coast downhill.

• Avoid excessively steep slopes or unstable surfaces. To avoid tip over DO NOT

drive across excessively steep slopes under any circumstances.

• Avoid turning on a slope. Never engage “inching” or shift to “Neutral” when going

downhill.

DO NOT park on a slope.

OW0200

Advertising
This manual is related to the following products: