Lull 944E-42 Operation Manual - Manual (Page 50)

Section 3 - Controls and Indicators
3-12 31200354
Front Joystick
The front joystick (1) controls attachment tilt, transfer carriage and auxiliary hydraulic
functions.
Attachment Tilt Function
• Move the joystick forward to tilt down, move the joystick back to tilt up.
Transfer Carriage Function
• Move the joystick right to extend transfer carriage; move joystick left to retract
transfer carriage.
• For two simultaneous functions, move the joystick between quadrants. For
example; moving the joystick forward and to the left will tilt attachment down and
retract transfer carriage simultaneously.
Auxiliary Hydraulic Function
• For attachments that require hydraulic supply for operation, press button (2) to
activate auxiliary hydraulics control. The button must be held down while moving
the joystick left or right. See Section 5 - Attachments for approved attachments
and control instructions.
WARNING
TIP OVER/CRUSH HAZARD. Rapid, jerky operation of controls will cause rapid,
jerky movement of the load. Such movements could cause the load to shift or fall
or could cause the machine to tip over.
OU1961
1
2