Normal engine operation, Shut-down procedure, Normal engine operation -4 shut-down procedure -4 – Lull 944E-42 Operation Manual User Manual

Page 64

Advertising
background image

Section 4 - Operation

4-4

31200354

Normal Engine Operation

• Observe gauges and indicators frequently to be sure all engine systems are

functioning properly.

Be alert for unusual noises or vibration. When an unusual condition is

noticed, park machine in safe position and perform shut-down procedure. Report
condition to your supervisor or maintenance personnel.

Avoid prolonged idling. If the engine is not being used, turn it off.

Shut-Down Procedure

When parking the telehandler, park in a safe location on flat level ground and away
from other equipment and/or traffic lanes.

1. Apply the park brake.

2. Shift the transmission to “Neutral.”

3. Lower forks or attachment to the ground.

4. Operate engine at low idle for 3 to 5 minutes. DO NOT over rev engine.

5. Shut off engine and remove ignition key.

6. Exit telehandler properly.

7. Block wheels (if necessary).

Advertising
This manual is related to the following products: