1 introduction - cummins qsb 4.5, 1 disclaimer and scope, Introduction - cummins qsb 4.5 – Lull 944E-42 Service Manual User Manual

Page 104: Disclaimer and scope

Advertising
background image

Engine

7-2

944E-42

7.1

INTRODUCTION - CUMMINS QSB 4.5

7.1.1

Disclaimer and Scope

These instructions are written for worldwide use. In
territories where legal requirements govern engine smoke
emission, noise, safety factors, etc., apply all instructions,
data and dimensions provided herein in such a way that
after maintenance, service and repair of the engine,
engine operation does not violate local regulations.

Note: These instructions cover only the routine
maintenance, removal, installation and troubleshooting
of the engine. Refer to the local Cummins Engine
Distributor and the applicable Cummins Engine Service
Manual for assistance with comprehensive engine
diagnosis, repair and component replacement.A gradual
running-in (break-in) of a new engine is not necessary.
Full load can be applied to a new engine as soon as the
engine is put into service and the coolant temperature is
at least 60° C (140° F). Extended light-load operation
during the early life of the engine is not recommended.
DO NOT run the engine at high, no-load speeds. DO
NOT apply an overload to the engine.

Advertising