Lull 944E-42 Service Manual - Manual (Page 65)

4-5 944E-42
Cab and Covers
6. Disconnect the brake return spring (5).
7. Remove the retaining clips and slide brake pedal
shaft (6) out, toward the right side console, from the
pedal support and brake pedal assembly.
8. Remove the bushings (7) from the brake pedal tube.
9. Remove the service brake pedal from the cab.
d. Service Brake Pedal Installation
Note: The bushings are a self-lubricating soft material
and should be inspected for reuse prior to installation.
1. Install the bushings (7) into the ends of the brake
pedal tube.
2. Slide the shaft (6) through the brake pedal tube and
install the shims and retaining clips.
3. Reattach the brake return spring (5).
4. Adjust the service brake as needed. Refer to Section
9.11.16, c. “Stabilizer Brake Switch Adjustment.”
5. Install the lower dash panel.
6. Properly connect the batteries.
7. Close and secure the engine cover.
4.3.4 Throttle Pedal
a. Throttle Pedal Removal
1. Park the machine on a firm, level surface, level the
machine, fully retract the boom, lower the boom,
place the travel select lever in the (N) NEUTRAL
position, engage the parking brake and turn the
engine OFF.
2. Place a Do Not Operate Tag on both the ignition key
switch and steering wheel, stating that the machine
should not be operated.
3. Properly disconnect the batteries.
4. Remove the lower (8), right front and right side (9)
console access panels.
5. Disconnect the throttle return spring (10).
6. Disconnect the electrical harness connector.
7. Remove the retaining clips (11) and shims (12) and
slide the shaft out, towards the left, from the throttle
assembly.
8. Remove the throttle pedal assembly from the cab.
b. Throttle Pedal Installation
1. Position the throttle pedal in its mounting location
within the cab.
2. Secure the throttle pedal in place with previously
used hardware.
3. Reconnect the wire harness plug to the front of the
throttle pedal.
4. Attach the return spring to the throttle pedal.
5. Properly connect the batteries.
MU3451
5
6
7
MU3561
9
8
11
12
10
11