Synergy 8560 - Dodge Cam Bolt Eliminator Kit User Manual
Ppm-8560 dodge cam bolt eliminator kit
SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397
PPM-8560 Dodge Cam Bolt Eliminator Kit
Version 1
GENERAL NOTES:
• These instructions are also available on our website; www.synergymfg.com.
Check the website before you begin for any updated instructions and additional
photos for your reference.
• These cam bolt eliminators are designed for users who are removing cam bolts
and upgrading to adjustable control arms
• Note:
-8560-14 is for 94-00 1500, 2500, 3500 4x4 trucks with 14mm bolts at the
axle.
-8560-16 is for 01-09 2500, 3500 4x4 trucks with 16mm bolts at the axle.
-8560-18 is for 2010-Present 2500, 3500 4x4 trucks with 18mm bolts at
the axle.
1. The OEM cam bolts can be removed with the vehicle on the ground. Simply do one
side at a time to prevent the axle from shifting.
2. Remove the factory control arm bolts.
3. Once removed, hammer out the OEM bolt from the factory cam bolt washer as
pictured below.